Ross Synergy 100 to Blackmagic Atem
Interface adapter for Ross Video Synergy 100 panel. No panel modification required, just plug in cables and it's ready to go.
Synergy 100 adapter - $565
Synergy 100 control panel - $1,299
Download : Synergy 100 - Quick User Guide.pdf
Download latest firmware: Synergy_100_v1.79.zip
Connect the adapter to the panel and Atem as shown in the diagram below:
Buttons & Knobs Names
Initial Setup
IP setup:
================================================
Press Shift + Cut/Fill + Menu buttons
Left Indicator show Atem
Use left SEL button for toggles between Atem or Panel ip setup
Central Indicator show ip1
Use central SEL button for toggles between 1-4 ip byte
for ip 192.168.10.240
ip1 - 192
ip2 - 168
ip3 - 10
ip4 - 240
Digit Indicator show .192
Use òñ button for change ip
x10 button multiplies value
if ip is changed, right Indicator show Save
Use right SEL button for Save to memory (Reboot required)
Shift + Save - save Atem ip to memory and reboot
Default ip setting:
Atem ip 192.168.10.240
Panel ip 192.168.10.99
=======================
Aux bus assignments:
================================================
Press Shift + Menu buttons
Left Indicator show AUX1
Use left SEL button for toggles between AUX1 - AUX6
Central Indicator show Bars (source short name)
Digit Indicator show 021 (source number)
Use òñ button for change source for selected AUX
x10 button multiplies value
Also can use the KEY bus buttons to select the source (pre-assigned).
Note: Atem outputs cannot be assigned to Program/Preset/Key buses.
If the source is changed, it will immediately take effect.
The right indicator shows Save
If you press the button, it is stored in memory.
Otherwise, this is effective before the reboot.
Default AUX setting:
All AUX assignment to Bars
=================================================
Program/Preview/Key bus buttons assignments:
=================================================
Press Menu button
Left Indicator show In 0
Use left SEL button for select button In 0 - In 8, Shift + In 0 - In 8
Central Indicator show Blk (source short name)
Digit Indicator show 000 (source number)
Use òñ button for change source for selected button
x10 button multiplies value
If the source is changed, it will immediately take effect.
The right indicator shows Save
If you press the button, it is stored in memory.
Otherwise, this is effective before the reboot.
Default settings:
Program Bus 0-9 - black, input 1-6, Media Player 1, Media Player 2
Program Bus 0-9 + Shift - bars, input 6-12, Color 1, Color 2
Preview Bus 0-9 - black, input 1-6, Media Player 1, Media Player 2
Preview Bus 0-9 + Shift - bars, input 6-12, Color 1, Color 2
Key Bus 0-9 - black, input 1-6, Media Player 1, Media Player 2
Key Bus 0-9 + Shift - bars, input 6-12, Color 1, Color 2
All Bus buttons can be easily changed for any of the 34 Atem sources
Note:
The Atem outputs cannot be used as inputs for Program / Preview buses.
Atem Outputs (Program, Preview, ClearFid, etc.) can be assigned to buttons for use as AUX sources only.
=================================================
Available source for Program/Preview/Key/Aux Buttons
=================================================
0 - Blk - Black
1 - In 1 - Input 1
2 - In 1 - Input 2
3 - In 1 - Input 3
4 - In 1 - Input 4
5 - In 1 - Input 5
6 - In 1 - Input 6
7 - In 1 - Input 7
8 - In 1 - Input 8
9 - In 1 - Input 9
10 - In10 - Input 10
11 - In11 - Input 11
12 - In12 - Input 12
13 - In13 - Input 13
14 - In14 - Input 14
15 - In15 - Input 15
16 - In16 - Input 16
17 - In17 - Input 17
18 - In18 - Input 18
19 - In19 - Input 19
20 - In20 - Input 20
21 - Bars - Color Bars
22 - Clr1 - Color 1
23 - Clr2 - Color 2
24 - Mp1f - Media Player 1 Fill
25 - Mp1k - Media Player 1 Key
26 - Mp2f - Media Player 2 Fill
27 - Mp2k - Media Player 2 Key
28 - SSrc - Super Source
29 - СlF1 - Clean Feed 1
30 - СlF2 - Clean Feed 2
31 - Pg1e - Program Out 1 M/E
32 - Pv1e - Preview Out 1 M/E
33 - Pg2e - Program Out 2 M/E
34 - Pv2e - Preview Out 2 M/E